HobbyKing
TURNIGY DLUX 10A (10~60V) HV SBEC
Adjustable Low Voltage Alarm | 10~60V |
Input | bare leads / Output |
Dimensions | 15.7 x 31 x 54mm |
Weight | 45g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Input Voltage:, 3~14S Lipoly (10~60V), Output Voltage:, 5.2V/6.0V/6.8V/7.4V/8.4V selectable, Output Current:, 10A @ 6V continuous (15A @ 6V peak), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type, Power Connector:,
The Turnigy dlux 10A HV switching BEC provides up to ...5 Reviews
HobbyKing
TURNIGY DLUX 10A LINEAR VOLTAGE REGULATOR (5.2~7.4V OUTPUT)
Input Voltage | 2S Lipoly (6~8.4V) |
Adjustable Low Voltage Alarm | 6.6~7.4V |
Input | JST plug / Output |
Dimensions | 55 x 31.5 x 14mm |
Weight | 35g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Output Voltage:, 5.2V/6.0V/6.8V/7.4V/8.4V selectable, Output Current:, 10A @ 6V continuous (15A @ 6V peak), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type, Power Connector:,
The Turnigy dlux 10A linear voltage regulator provides up to ...5 Reviews
HobbyKing
HOBBYKING 7A 5.5V HIGH VOLTAGE INPUT UBEC (23~45V)
Input Lead | bare wire leads |
Output Lead | JR receiver plug |
Dimensions | 46x28x9mm |
Weight | 16g |
Features:, • High-voltage input (6~12S lipoly), Specs:, Input Voltage:, 23~45V (6~12S lipoly), UBEC Output:, 5.5V / 7A continuous,
This high quality UBEC will output a steady 5.5V and ...5 Reviews
HiModel
3.5-7V RX BATTERY VOLTAGE LEVEL LED INDICATOR
Wire length | 28cm |
Working voltage | 3.5 to 7V (typically for 4.8V or 6V RX battery) |
Connector type | Futaba/JR compatible |
5V above | green LED |
5-4.5V | Green , flash slowly |
4.5-4V | Red LED |
Below 4V | Red LED, quick flash |
, , , , , , Specifications:, , , , , , , , , , , 3.5-7V RX Battery Voltage Level Indicator, Weight: 4g, Working current: , Status:, * This unit can only work under 7V, and can not connect directly to 2S Lipo., , ,
HiModel
HV SERVO DIRECT POWER SUPPLY CONNECTOR W/BEC FE-DPC-1
Input | 6~8.4v |
BEC output current | 2A to receiver |
Connector type | JR/Futaba compatible |
Wire length | 30mm |
Weight | 13g / 0.46oz |
, , , , , , Specifications:, , , , , , , , , , , BEC output voltage: 5V, This version has one servo output, and one receiver output., * The receiver output must connect to the matching channel of the servo, for example, if the servo is for elevator, then the receiver connector should be plugged to the RX elevator channel., , ,
Features: Typical application: Use one 2S lipo to power a ...HiModel
4-WAY HV SERVO DIRECT POWER SUPPLY CONNECTOR W/BEC FE-DPC-4
Input | 6~8.4v |
BEC output current | 2A to receiver |
Connector type | JR/Futaba compatible (4 connectors for servos, 4 connectors to receiver) |
Wire length | 30mm |
Weight | 32g / 1.13oz |
, , , , , , Specifications:, , , , , , , , , , , BEC output voltage: 5V, This version has 4 servo outputs., Wiring hint: simply plug the 4 servos to the servo outputs, and connect the matching RX connectors to the relative channels., , ,
Features: Typical application: Use one 2S lipo to power a ...HiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 100CM
Length | 100 CM |
Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extensionHiModel
60-CORE WIRE LARGE CURRENT Y LEAD 15CM
Length | 15 CM |
Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires large current Y lead, , ,
Includes/Requires: Includes:1 x Y leadHiModel
3-IN-1 15A UBEC STEP DOWN SWITCH HARNESS W/LED VOLTAGE METER
Input volt range | 6V to 13V |
Max Current | 0-15A ( MAX |
Output voltage | 4.8-9.6V (stepless adjustable, factory default voltage |
Wire type | silicon wire |
Connector Type | output Futaba/JR compatible |
Weight | 60g |
Dimension | 64mm ( L ) * 27mm ( W) * 35mm ( H ) |
, , , , , , Specifications:, , , , , , , , , , , 3-in-1 15A UBEC Step Down Switch Harness W/LED Voltage Meter, input JST connector, , ,
Features: Using ultra high brightness led segment which can ...HiModel
60-CORE WIRE LARGE CURRENT SWITCHING HARNESS W/CHARGING PORT
Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core Wires Large Current Switching Harness W/Charging Port, , ,
Includes/Requires: Includes: 1 x Switching Harness W/Charging PortHiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 50CM
Length | 50 CM |
Connector | compatible with Futaba & JR |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extensionHiModel
TWISTED SERVO EXTENSION 30CM
Length | 30 CM |
Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , Twisted Servo Extension, , ,
Features: Twisted wire eliminates the interference. Includes/Requires: Includes:1 x servo ...HiModel
TWISTED SERVO EXTENSION 50CM
Length | 50 CM |
Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , Twisted Servo Extension, , ,
Features: Twisted wire eliminates the interference. Includes/Requires: Includes:1 x servo ...HiModel
TWISTED SERVO EXTENSION 100CM
Length | 100 CM |
Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , Twisted Servo Extension, , ,
Features: Twisted wire eliminates the interference. Includes/Requires: Includes:1 x servo ...HiModel
60-CORE WIRE LARGE CURRENT SERVO EXTENSION 10CM
Length | 10 CM |
Connector | compatible with both JR & Futaba |
, , , , , , Specifications:, , , , , , , , , , , 60-core wires Servo Extension, , ,
Includes/Requires: Includes:1 x servo extension